Cisco Nexus 93180YC-FX3 Switch Ethernet (N9K-C93180YC-FX3) (2024)

FAQs

What is the switching capacity of N9K C93180YC FX3H? ›

The Cisco Nexus N9K-C93180YC-FX3H is a 1RU switch with 24 downlink ports (configurable among 48), supporting 1-, 10-, or 25-Gbps Ethernet. Its 6 uplink ports are adaptable for 40 and 100-Gbps Ethernet, providing versatile migration choices.

The key difference between the Cisco Nexus 93180YC-FX and 93180YC-EX lies in the additional enhanced features of the 93180YC-EX model. The 93180YC-FX is a fixed-port switch designed for data center deployments, offering 48 10/25-Gbps fiber ports and 6 40/100-Gbps QSFP28 uplink ports.

Leveraging the Cisco Unified Fabric, which unifies storage, data and networking (Ethernet/IP) services, the Nexus Switches create an open, programmable network foundation built to support a virtualized data center environment.

In conclusion, the fundamental distinction between a Cisco Catalyst switch and a Cisco Nexus switch is that Catalyst switches run IOS while Nexus switches use NX-OS. For generating Ether channels, Catalyst switches support both LACP and PAGP, but Nexus switches only support LACP.

The latency of the Cisco Nexus 93180 switch is typically around 1 to 2 microseconds. This low latency is crucial for high-performance networking environments where fast data transmission is essential.

High Performance and Scalability: Cisco Nexus switches are built to handle high data throughput, making them ideal for large-scale data centers.

Nexus 6000 series

The Cisco Nexus 6000 range contains two models, the 6001 model and the 6004 model. They can be used as layer2 and layer3 switches and can aggregate traffic from the Fabric Extenders (FEX) for different blade-server systems.

You can connect to the switch using a terminal plugged into the console port. You can also connect to the switch with Telnet or SSH. The switch supports up to eight simultaneous Telnet and SSH connections. To connect with Telnet or SSH, you need to know the hostname or IP address of the switch.

High Quality and Reliability

The company invests heavily in research and development to ensure that their devices meet the rigorous demands of modern networks. One of the main reasons behind the higher cost of Cisco devices is the use of high-quality components.

Is a Cisco switch also a router? ›

While switches allow different devices on a network to communicate, routers allow different networks to communicate. A router is a networking device that routes data packets between computer networks. A router can connect networked computers to the Internet, so multiple users can share a connection.

The Cisco Catalyst 4500-X Series offers the size, scalability, and enhanced security you need. And its high-availability features reduce downtime. Cisco Meraki MS250 series switches provide reliable access switching ideal for deploying in branches and small campuses.

Switching Capacity:

It is calculated as, The switching capacity of a fiber optic network switch = total number of ports * rate of the port * 2 (for full-duplex). For example: The switching capacity of the 24-port 100 M switch will be 24*100*2 and this value comes to 4.8Gbps.

Definition. The maximum load capacity that can be switched. Design circuits to ensure that this value is not exceeded during operation. Maximum switching capacity is expressed as volt-amps (VA) for AC Relays and watts (W) for DC Relays.

Switching Capacity: The maximum amount of capacity in FDX, that the switch can accept. ( Switch Port Maximum Speed+SFP Port Maximum Speed*2=Switching Capacity) Forwarding Rate: The maximum amount of packets (regardless of size) the switch can process per second.

Switching capacity or switching load is usually rated with both voltage and current. The voltage is the load voltage which will be across the terminals of the relay when it is open. The current is the load current that will flow through both the load and relay when it is closed.